Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start the engine for a few minutes to warm the engine oil, which will become less viscous and drain more quickly from the oil compartment. It is recommended to change the oil with the bike on a stand. Under the engine, behind the primary cover, there is a small oil drain tube: loosen the clip and free the tube, collecting the used oil in a container (dispose of it properly). Also, open the upper fill hole of the oil compartment to aid draining with the airflow. Meanwhile, unscrew the filter with a pipe wrench and install the new filter (lubricate the O-ring first). Fill with new lubricant through the upper fill hole.

Updated on 18 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil on a Harley Davidson Sportster 1200
How to Change the Engine Oil on a Harley Davidson Sportster 1200
Sportster 1200 In today's tutorial, you will learn how to change the engine oil and oil filter on a Harley Davidson Sportster 1200. First, place your bike on a stan…
How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
Sportster 1200 In this tutorial, you will see how to change the engine oil in the Harley-Davidson Sportster 1200, a very simple and quick operation to perform every…
How to Change the Engine Oil of the Harley Davidson Sportster 1200
How to Change the Engine Oil of the Harley Davidson Sportster 1200
Sportster 1200 To change the engine oil of the Harley Davidson Sportster 1200, unscrew the plug located at the central lower part of the bike to collect all the use…

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos