Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Harley Davidson
    3. :
  3. Sportster
    4. : How do I replace the Harley Davidson Sportster instrument cluster bulb?

Model: Harley Davidson Sportster
Part: Light bulb
How do I replace the Harley Davidson Sportster instrument cluster bulb?

In order to replace the Harley Davidson Sportster instrument panel light bulb, you need to loosen all the screws located on the rear part of the speedometer. In this way it will be possible to free the plastic plate, under which the bulb to be replaced is located. The latter can then be extracted from its housing, disconnected from the connector and replaced with a new spare part. Once the new bulb has been inserted, you will be able to reinstall the cover plate and secure it by screwing in the screws behind the speedometer.


Posted on 13 March 2024 by ScegliAuto



How do you replace the Harley Davidson Sportster instrument cluster bulb?
Sportster Replacing the instrument panel bulb on the Harley Davidson Sportster is done by disconnecting the corresponding connector which is located in the rea
How to replace the headlight bulb on the Harley-Davidson Sportster?
Sportster In this tutorial, we can see how to replace the headlight bulb on the Harley-Davidson Sportster, an extremely simple and quick operation. First of al
How do you replace the taillight bulb on the Harley Davidson Sportster?
Sportster In order to replace the rear headlight bulb of the Harley Davidson Sportster, you need to loosen the two side screws that secure the headlight to its

How to change the engine oil and relative filter of Suzuki Access 125

The guide shows how to replace the engine oil and relative filter on the Suzuki Access 125 scooter. The first operation to perform is to open the stand and secure the vehicle. At this point, having opened the oil filler cap, unscrew the 14 mm drain bolt from the bottom of the scooter; place a container for fluid disposal. Carry out a cleaning cycle from the old oil with diesel oil or with the specific additive. Install the new drain plug gasket and put it back in place. Unscrew the three 8 mm fixing bolts of the filter cover and remove the old cartridge and gasket. Install the new elements after cleaning the housing and tighten the cover in place. Top up the oil tank and run the engine for a few minutes; then realign the fluid to the correct level.

Watch the video!


by ScegliAuto

More videos