Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Harley Davidson Sportster Iron 883

Model: Harley Davidson Sportster Iron 883
Part: Battery

Video tutorial

To replace the battery on the Harley Davidson Sportster Iron 883, loosen the screws that secure the seat so it can be removed. This will allow you to detach the side plastic cover located on the left side of the bike, under which the battery is found.

The battery can be extracted from its housing by disconnecting all the appropriate terminals and unscrewing the securing bolts. The new battery can then be inserted into its housing, connected, and secured so that the side cover and seat can be reattached.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacing the Battery on Harley Davidson Sportster Iron 883
Replacing the Battery on Harley Davidson Sportster Iron 883
Sportster Iron 883 To access the battery on the Harley Davidson Sportster Iron 883, first remove the left side fairing shown in the video, followed by the seat (unscrew…
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial, we will see how to replace the headlight on a Harley-Davidson Sportster Iron 883, an extremely simple and quick operation. First, e…
How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 This tutorial shows how to replace the front headlight on a Harley-Davidson Sportster Iron 883, a very simple and quick operation. First, ensure that…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos