Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If the clock on your Harley Davidson displays an incorrect time and you want to change it manually, follow these steps. First, turn on the ignition and press the menu button multiple times until the time is displayed. Then, press and hold the same button for about 5 seconds and release it as soon as the display starts to flash. Select your preferred format (12H or 24H) and press and hold the button again for another 5 seconds. Finally, adjust the hour and minute digits. Press the button until the time stops flashing to save the changes.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rearview mirror of the Harley Davidson Touring?
How do you replace the rearview mirror of the Harley Davidson Touring?
Touring In order to replace the rearview mirror of the Harley Davidson Touring, you need to loosen the screws that fix the piece to its housing on the side o…
How to replace the front headlight on the Harley-Davidson Touring?
How to replace the front headlight on the Harley-Davidson Touring?
Touring In this tutorial we can see how to replace the front headlight on the Harley-Davidson Touring, an extremely simple and quick operation. First of all,…
How to change the engine oil on the Harley Davidson Fat Boy?
How to change the engine oil on the Harley Davidson Fat Boy?
Touring To change the engine oil on the Harley Davidson Fat Boy, loosen the drain plug located at the bottom centre of the vehicle's oil sump. Once the plug …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos