Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the 2022 Honda Rebel 500

Model: Honda Rebel 1100
Part: Clock

Video tutorial

In today's article, we will see how to set the correct time on the dashboard of the 2022 Honda Rebel 500. The procedure takes less than 1 minute to complete and no tools are necessary. To perform this operation, first start the motorcycle's dashboard, then simultaneously press the side buttons located on the top of the dashboard and wait for the time to start flashing.

At this point, use the left button to select 12 or 24-hour format, confirm with the right button, then use the left button to adjust the time and confirm again with the right button before moving on to adjusting the minutes. After confirming the procedure again, it will be complete.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

How do you set the clock on the Honda Rebel?
How do you set the clock on the Honda Rebel?
Rebel 1100 Just like cars, motorcycles also have the ability to set the time, and in this regard, thanks to the video tutorial available here, we will learn the…
How to Set the Time on a Honda Rebel 1100
How to Set the Time on a Honda Rebel 1100
Rebel 1100 In this tutorial, see how to set the time on a Honda Rebel 1100, a very simple and quick operation to perform, for example, after disconnecting the b…
How to Change the Engine Oil of a Honda Rebel 1100
How to Change the Engine Oil of a Honda Rebel 1100
Rebel 1100 Before you can start, position your Honda Rebel 1100 on its side stand. Begin by placing a container underneath the oil sump. Next, unscrew and remov…

How to Reset the V-Belt Light on a Yamaha Xmax 125?

On the Yamaha Xmax 125, the V-Belt light can be reset by turning on the instrument panel with the ignition key inserted in the ignition switch. Once the instrument panel is powered, you can remove the panels located on the left front side. Below, you will find a connector that needs to be disconnected for five seconds, as shown in the relevant tutorial. Once this time has passed, reconnect the connector to turn off the light completely. At the end of the procedure, you can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos