Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the front headlight of the Harley Davidson Touring, you need to loosen the screws that secure the headlight assembly inside its housing: these screws will be located around the corresponding headlight. Once they have been loosened, it will be possible to remove the headlight assembly from its seat and disconnect the connector inside: this will allow you to completely remove the headlight and connect a new one to the connector. Then you can insert it into its seat, so that it is properly secured with the respective screws.

Posted on 4 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Harley-Davidson Touring?
How to replace the front headlight on the Harley-Davidson Touring?
Touring In this tutorial we can see how to replace the front headlight on the Harley-Davidson Touring, an extremely simple and quick operation. First of all,…
How to replace the exhaust on the Harley Davidson Touring?
How to replace the exhaust on the Harley Davidson Touring?
Touring To replace the exhaust on the Harley Davidson Touring, you need to detach the two panniers located at the rear of the bike: this will allow access to…
How to Change the Engine Oil of a Harley Davidson Touring?
How to Change the Engine Oil of a Harley Davidson Touring?
Touring To change the engine oil on a Harley Davidson Touring, start by unscrewing the oil drain plug located at the central lower part of the bike. Once thi…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos