Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlamp bulb on a Harley-Davidson Ultra Ltd, a very simple and quick operation. First, ensure that the key is not inserted, then locate the screws at the bottom of the headlamp and unscrew them using a Torx T25 key. Next, separate the headlamp from the base, remove the large rubber cap, and extract the old bulb by unlocking the retaining clip. At this point, simply insert the replacement, reconnect it, and follow the reverse procedure.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Harley Davidson Ultra Classic?
How do you replace the headlight bulb of the Harley Davidson Ultra Classic?
Ultra In order to replace the headlight bulb of the Harley Davidson Ultra Classic, you need to remove the chrome trim around the corresponding front headli…
How to Replace the Coolant in a Harley Davidson Ultra
How to Replace the Coolant in a Harley Davidson Ultra
Ultra In this brief and simple guide, you will find instructions to drain and replace the coolant in a Harley Davidson Ultra motorcycle. First, place your …
How to Replace the Battery of the Harley Davidson Ultra?
How to Replace the Battery of the Harley Davidson Ultra?
Ultra To replace the battery of the Harley Davidson Ultra, first detach the seat by removing it from the respective clips located underneath. Once the seat…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos