Do it yourself
Frequently asked questions about cars and motorcycles
In this brief and simple guide, you will find instructions to drain and replace the coolant in a Harley Davidson Ultra motorcycle. First, place your motorcycle on a stand and start by removing the side cover located at the bottom right to expose the water pump casing. Then, remove the coolant hose, allowing it to drain into a container for about ten minutes. At this point, reconnect the hose and unscrew the radiator cap, topping up with the new fluid!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ultra To replace the battery of the Harley Davidson Ultra, first detach the seat by removing it from the respective clips located underneath. Once the seat…
Ultra To set the clock on the Harley Davidson Ultra, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press t…
Ultra In this tutorial, you will see how to replace the front headlamp bulb on a Harley-Davidson Ultra Ltd, a very simple and quick operation. First, ensur…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos