Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the transmission oil on a Honda SH 125 scooter?

Model: Honda Sh 125i
Part: Transmission fluid

Video tutorial

In this tutorial, you will see how to replace the transmission oil on the Honda SH 125 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath it, locate the two bolts at the bottom of the transmission casing, and unscrew them using a 12mm spanner.

Allow all the oil in the system to drain out, tighten the lower bolt, and using a large syringe, inject the necessary amount of oil to reach the maximum level.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to change the transmission oil on the Honda SH 125 scooter
How to change the transmission oil on the Honda SH 125 scooter
Sh 125i In this tutorial, you can see how to change the engine oil on the Honda SH 125 scooter, a very simple and quick operation. First, wait for the engine…
How to Change the Engine Oil in a Honda SH 125 Scooter
How to Change the Engine Oil in a Honda SH 125 Scooter
Sh 125i In this tutorial, you will learn how to change the engine oil in a Honda SH 125 scooter, a very simple and quick operation. First, wait until the eng…
How to Change the Engine Oil on a Honda SH 125 Scooter
How to Change the Engine Oil on a Honda SH 125 Scooter
Sh 125i Changing the engine oil on a Honda SH 125 scooter, as shown in this tutorial, is an extremely simple and quick task. First, wait until the engine is …

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos