Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Honda CBR 1000RR?

Model: Honda Cbr 1000rr
Part: Engine oil

Video tutorial

To change the gear oil on a Honda CBR 1000RR, start by lifting the bike on a stable stand to ensure access to the underside of the engine. Identify the gear oil drain plug, usually located at the bottom of the gearbox casing.

Position a collection container under the plug and slowly unscrew it to allow the used oil to drain. Ensure all the old oil is completely drained.

Next, refit the drain plug, ensuring it is tightly secured. Fill the gearbox with new oil through the fill hole, which is typically located at the top of the gearbox or on the side.

After adding the correct amount of oil, check for leaks and ensure the level is correct. Finally, start the engine and let it run for a few minutes, checking for any leaks and ensuring the gearbox operates correctly.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Honda CBR 1000RR?
How do you replace the engine oil of the Honda CBR 1000RR?
Cbr 1000rr It will be possible to replace the motor oil of the Honda CBR 1000RR by loosening the screws that secure the lower panel: once the panel is removed, …
How to replace the engine oil in the Honda CBR 1000RR?
How to replace the engine oil in the Honda CBR 1000RR?
Cbr 1000rr In this tutorial, we can see how to replace the engine oil in the Honda CBR 1000RR, an extremely simple and quick operation. First of all, make sure …
How to Change the Engine Oil on the Honda CBR 1000RR?
How to Change the Engine Oil on the Honda CBR 1000RR?
Cbr 1000rr To change the engine oil on the Honda CBR 1000RR, unscrew the plug located at the central lower part of the bike to collect all the used oil in a sui…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos