Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 300
Part: Air filter

In this tutorial we can see how to replace the air filter in the Honda SH 300 scooter, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, so that you can work safely, then unscrew the various screws along the perimeter of the airbox using a simple screwdriver with a cross tip. Then unscrew the additional screws indicated, remove the old filter and clean the inside of the box from any possible dirt residue. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Honda SH 300 Scooter?
How to Replace the Air Filter on a Honda SH 300 Scooter?
Sh 300 In this tutorial, you will learn how to replace the air filter on a Honda SH 300 scooter, a very simple and quick operation. Before proceeding, ensur…
How to Replace the Air Filter of the Honda SH 300?
How to Replace the Air Filter of the Honda SH 300?
Sh 300 To remove the air filter of the Honda SH 300, it is necessary to take off the plastic cover located between the seat and the rear wheel. Once this is…
How to Replace Oil and Filter on a Honda SH 300
How to Replace Oil and Filter on a Honda SH 300
Sh 300 How to replace the engine oil and filter on a Honda SH 300 scooter? Follow this guide to proceed with the replacement. Position the scooter on the or…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos