Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for using the commands on a Honda SH

Model: Honda Sh 125i
Part: Instrument cluster

Video tutorial

We can see in this video how the commands work on a Honda SH model scooter: with the "info A" button you can control all the functions of the upper part of the dashboard, such as the partials, consumption, battery, remaining fuel, clock and total km. With the "info B" button you can control the functions in the lower part, namely "HSCT ON" and "TSC control" which can be deactivated by holding the button down for a long time, the same goes for the start & stop.

When the reserve is reached, the orange light flashes to signal the problem; then we have the engine light and the key to indicate the need for a service: if it flashes five times it means that the remote control is running out of battery.


Posted on 6 February 2025 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on a Honda SH 125i
How to Reset the Engine Oil Light on a Honda SH 125i
Sh 125i Today, we will see the main steps to reset the service light for the oil change on the Honda SH 125i scooter in this short and simple guide. First, t…
Where are the fuses on the Honda SH
Where are the fuses on the Honda SH
Sh 125i In today's video, you will learn how to locate the fuses on the Honda SH. First, remove the central shield. Once done, you can access the fuse box, h…
How to Turn Off the Oil Light on the Honda SH
How to Turn Off the Oil Light on the Honda SH
Sh 125i In today's video, you will see how to turn off the service reminder light on the Honda SH. Turn the key and switch on the instrument panel. Navigate …

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos