Do it yourself
Frequently asked questions about cars and motorcycles
To replace the starter motor of the Honda CB 900F, we unscrew the eight screws of the flange under the cylinders, on the side of the gear pedal, and remove it. We remove the small gear at the top right, unscrew the two screws of the starter motor cover and remove it together with the gasket, unscrew the screws that fix the motor, use a hammer to unlock it and remove it by disconnecting the electrical connections. Insert a new starter motor, restore the connections, position it and tighten the screws, put back the gear, position the gasket, and then the flange by tightening it with its screws, put back the cover and gasket of the starter motor by screwing the screws.

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Cb 900f In this guide, you will find instructions for removing and replacing the clutch on the Honda CB 900F. First, place the motorcycle on a stand and star…
Cb 900f In this tutorial, you will see how to replace the engine oil in the Honda CB900F, an extremely simple and quick operation. First, ensure the engine i…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos