Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch on the Honda CB 900F?

Model: Honda Cb 900f
Part: Clutch

Video tutorial

In this guide, you will find instructions for removing and replacing the clutch on the Honda CB 900F. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Then, remove the gear lever and subsequently the clutch cover by unscrewing the fastening screws, as shown in the video.

At this point, unscrew the screws of the clutch pack, removing each disc one by one; replace them with new ones and reassemble the clutch pack, topping up with new engine oil.


Posted on 15 May 2026 by ScegliAuto


Related tutorials

Replacement of the starter motor of the Honda CB 900F
Replacement of the starter motor of the Honda CB 900F
Cb 900f To replace the starter motor of the Honda CB 900F, we unscrew the eight screws of the flange under the cylinders, on the side of the gear pedal, and …
How to Replace Engine Oil in the Honda CB900F?
How to Replace Engine Oil in the Honda CB900F?
Cb 900f In this tutorial, you will see how to replace the engine oil in the Honda CB900F, an extremely simple and quick operation. First, ensure the engine i…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos