Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Honda PCX 125 scooter?

Model: Honda Pcx 125
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Honda PCX 125 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then place a container under the scooter, locate the drain hole bolt and unscrew it using a 12mm socket wrench.

Let all the oil in the system drain out, disconnect the rear brake cable by unscrewing the bolt, and, with a 17mm wrench, unscrew the filter cap, which should be cleaned of any dirt residue. At this point, all that remains is to reassemble everything and pour the necessary amount of oil through the appropriate hole.


Posted on 20 October 2025 by ScegliAuto


Related tutorials

How to change the engine oil in a Honda PCX 125 scooter?
How to change the engine oil in a Honda PCX 125 scooter?
Pcx 125 This tutorial shows how to change the engine oil in a Honda PCX 125 scooter, a very simple and quick operation. First, ensure the engine is cool enou…
How to Change the Engine Oil on a Honda PCX 125 Scooter?
How to Change the Engine Oil on a Honda PCX 125 Scooter?
Pcx 125 In this tutorial, see how to change the engine oil on a Honda PCX 125 scooter, a very simple and quick operation to perform every 12 months. First, e…
How to Change the Engine Oil in a Honda PCX 125 Scooter?
How to Change the Engine Oil in a Honda PCX 125 Scooter?
Pcx 125 In this tutorial, you will see how to change the engine oil in the Honda PCX 125 scooter, a very simple and quick operation to perform every 3,100 mi…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos