Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Honda CBR 1000RR?

Model: Honda Cbr 1000rr
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Honda CBR 1000RR, an extremely simple and quick operation. First, let's make sure that the engine is cold enough to operate safely, then we remove the lower cover and place a container underneath the bike.

Next, we locate the drain hole bolt, unscrew it using a socket wrench, and let all the oil in the system drain out. At this point, all that is left is to unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Honda CBR 1000RR?
How to Change the Engine Oil on the Honda CBR 1000RR?
Cbr 1000rr To change the engine oil on the Honda CBR 1000RR, unscrew the plug located at the central lower part of the bike to collect all the used oil in a sui…
How to Change the Engine Oil in a Honda CBR 1000RR?
How to Change the Engine Oil in a Honda CBR 1000RR?
Cbr 1000rr In this tutorial, you will see how to change the engine oil in a Honda CBR 1000RR, a very simple and quick operation. First, ensure that the engine i…
How to Change the Engine Oil in a Honda CBR 1000RR
How to Change the Engine Oil in a Honda CBR 1000RR
Cbr 1000rr In this tutorial, see how to change the engine oil in a Honda CBR 1000RR, a very simple and quick operation. First, ensure the engine is sufficiently…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos