Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 1000rr
Part: Clock

In this tutorial, see how to set the time on a Honda CBR 1000RR, a very simple and quick operation to perform after disconnecting the battery or after the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and hold down the lower left button on the dashboard until the clock starts flashing. Adjust the hour with the upper button, switch to minutes with the lower button, and adjust them in the same way. To save the setting, simply press the lower button one last time.

Posted on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Side Fairing on the Honda CBR 1000RR?
How to Remove the Side Fairing on the Honda CBR 1000RR?
Cbr 1000rr In this tutorial, we will see how to remove the side fairing on the Honda CBR 1000RR, a very simple and quick operation. First, stand in front of the…
How to replace the engine oil in the Honda CBR 1000RR?
How to replace the engine oil in the Honda CBR 1000RR?
Cbr 1000rr In this tutorial, we can see how to replace the engine oil in the Honda CBR 1000RR, an extremely simple and quick operation. First of all, make sure …
How to Replace the Coolant on a Honda CBR 1000RR
How to Replace the Coolant on a Honda CBR 1000RR
Cbr 1000rr Today, you will learn how to bleed the cooling system and replace the radiator fluid or antifreeze on a Honda CBR 1000RR. First, unscrew the cap of t…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos