Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : Crosstourer

Engine Oil and Oil Filter Replacement Honda Crosstourer

Model: Honda Crosstourer
Part: Oil filter

Video tutorial

First, warm up the engine for a few minutes, then turn it off and wait a few minutes for the oil to settle. Remove the plastic protection cover on the right side.

This cover is secured with two clips that need to be pressed in the centre to allow removal. Remove the lower fairing, which is secured with two screws at the ends and one clip in the centre.

To access the filter, remove the bracket that is visible using the appropriate screw. Remove the filler cap, then the drain plug located under the bike near the oil sump.

Unscrew the visible oil filter and proceed in reverse order to reassemble.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Crosstourer Replace the air filter on a Yamaha Crosstourer. Follow this guide video for the replacement procedure. Position the scooter on the centre stand, and …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Oil Service on a SYM Sport Rider 125 Scooter?

In this tutorial, you will learn how to reset the oil service on a SYM Sport Rider 125 scooter, a very simple and quick operation to perform only after completing the required scheduled maintenance work. First, insert the key and turn on the instrument panel, then access the service interval by repeatedly pressing the "MODE" button located to the right of the display. Once done, hold down the "SET" button for the necessary time until the interval resets correctly. To verify that the reset was successful, you can restart the instrument panel.

Watch the video!


by ScegliAuto

More videos