Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 300i
Part: Headlight

In today's video, you will see instructions on how to remove the front headlight on a Honda SH 300i scooter. First, remove the windscreen by unscrewing the Torx screws; once removed, also take off the hand guards by levering and removing the push clips, as shown in the video. Next, remove the top cover of the headlight by sliding off the two brackets of the windscreen; unscrew the two upper screws of the headlight and the lower ones. Finally, gently extract the front headlight, disconnecting the electrical connector of the bulb; follow the video to the end for the bulb replacement!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda SH 300i
How to Replace the Front Brake Pads on a Honda SH 300i
Sh 300i In this video, you will see how to remove and replace the front brake pads on a Honda SH 300i scooter in simple and quick steps. First, place your sc…
How to Replace the Battery in a Honda SH 300i
How to Replace the Battery in a Honda SH 300i
Sh 300i In this video tutorial, you will learn how to dismantle and replace the battery of a Honda SH 300i. First, remove the plastic panel located at the fr…
How to Replace the Brake Pads on the Honda SH 300i ABS
Sh 300i In this guide, you will learn the steps to remove and replace the front and rear brake pads on the Honda SH 300i ABS scooter. First, place the scoote…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos