Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Shadow 750
Part: Battery

As shown in the video, start by unscrewing the two T40 Torx screws that secure the strap at the back of the seat. At this point, you can remove the seat by sliding it slightly back and lifting it. Now you can see the top cover of the battery: move the various cables between you and the cover, unscrew the screw that secures it, and remove it. Voila! Here is the battery. Disconnect the two terminals, unscrewing the negative first (always the negative first) and then the positive, and finally remove it. Insert the new battery and proceed in reverse order until fully reassembled, connecting the two terminals and refitting the cover and then the seat.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Honda Shadow 750?
How do you replace the motor oil of the Honda Shadow 750?
Shadow 750 The oil change of the Honda Shadow 750 can be performed by loosening the drain plug located in the central lower part of the vehicle: once the plug i…
How to Replace the Headlight Bulb on a Honda Shadow 750
How to Replace the Headlight Bulb on a Honda Shadow 750
Shadow 750 To replace the headlight bulb on a Honda Shadow 750, loosen the two screws located on either side of the headlamp. This will allow the unit to be ful…
Honda Shadow 750 Clutch Replacement
Honda Shadow 750 Clutch Replacement
Shadow 750 In today's tutorial video, you will see the main steps to remove and replace the clutch on a Honda Shadow 750. First, remove the bolts from the right…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos