Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the front wheel of the Triumph Tiger 800 XC, loosen the bolts securing the brake caliper to the corresponding disc. Once detached, proceed to loosen the nuts that secure the front wheel to the bottom of the fork. This will allow you to remove the wheel from its housing and replace it with a new part. Ensure it is properly secured with the relevant bolts, reposition the caliper onto its mount, and secure it with the bolts that were removed earlier.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of the Triumph Tiger 800?
How to Remove the Front Wheel of the Triumph Tiger 800?
Tiger 800 Xc To remove the front wheel of the Triumph Tiger 800, you need to loosen the central nut that secures the axle located at the base of the front fork an…
How to Remove the Rear Wheel of the Triumph Tiger 800
How to Remove the Rear Wheel of the Triumph Tiger 800
Tiger 800 Xc To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the …
How to replace the front brake pads on the Triumph Tiger 800 XC?
How to replace the front brake pads on the Triumph Tiger 800 XC?
Tiger 800 Xc In this tutorial, we can see how to replace the front brake pads on the Triumph Tiger 800 XC, a very simple and quick operation. First of all, positi…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos