Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel of the Triumph Tiger 800?

Model: Triumph Tiger 800 Xc
Part: Wheel

Video tutorial

To remove the front wheel of the Triumph Tiger 800, you need to loosen the central nut that secures the axle located at the base of the front fork and at the centre of the wheel. Once this nut has been removed, you can slide out the corresponding axle; then you can loosen the bolt that secures the brake caliper, detaching it from the disc.

Now the corresponding wheel can be completely removed, and you can insert the new replacement part: the brake caliper must be reattached to the disc, and the wheel can be installed using the corresponding axle.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the Triumph Tiger 800 XC
How to Remove the Front Wheel of the Triumph Tiger 800 XC
Tiger 800 Xc To remove the front wheel of the Triumph Tiger 800 XC, loosen the bolts securing the brake caliper to the corresponding disc. Once detached, proceed …
How to Remove the Rear Wheel of the Triumph Tiger 800
How to Remove the Rear Wheel of the Triumph Tiger 800
Tiger 800 Xc To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the …
How to replace the oil in the front forks of the Triumph Tiger 800 XC
How to replace the oil in the front forks of the Triumph Tiger 800 XC
Tiger 800 Xc These short and simple instructions will show us how to disassemble and replace the fork oil of the Triumph Tiger 800 XC motorcycle. First, we put th…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos