Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Sh 125i
    4. : Oil change light reset on Honda SH 125 2017

Model: Honda Sh 125i
Part: Checks and maintenance
Oil change light reset on Honda SH 125 2017

In this video tutorial we will see how to reset the oil change or service warning light on a 2017 Honda SH 125i scooter by following these simple steps. First of all we go to press the button that we find on the right of the instrument panel, keeping it pressed; then let's turn on the ignition and keep the button pressed for a few seconds until the oil change light disappears, as shown in the video. At this point we can turn off the ignition and turn on the vehicle, checking that the oil change (service) light has been reset correctly!


Posted on 29 January 2024 by ScegliAuto



How to reset the oil change light on Honda Sh 125
Sh 125i The oil change service on the Honda SH 125 is carried out for the first time after 1000 km and then at 4000, then at 6000.8000 and 12000 km and the o
How to reset the Honda SH 125 oil change warning light?
Sh 125i To reset the Honda SH 125 Oil Service warning light, insert the key inside the cylinder and turn it until the instrument panel lights up. The light t
To reset the oil light on the Honda Sh 125.
Sh 125i If you own a Honda Sh 125 and want to learn how to properly reset the oil light manually, then all you have to do is carefully read the following gui

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos