Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Brake Pads on a Honda NC 750 X

Model: Honda Nc 750 X
Part: Brake pads

Video tutorial

Today, you will learn a simple operation: replacing the rear brake pads on a Honda NC 750 X. First, remove the caliper from the brake disc by unscrewing the two bolts that secure it. Once done, detach the caliper from the disc and simply extract the worn pads inside.

Expand the slots where the pads were, as the new pads you will fit will obviously be thicker than the worn ones you removed.

Insert the new pads and refit the caliper by tightening the two bolts. Good luck!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Nc 750 X These brief and simple instructions will illustrate the procedure for removing and replacing the engine air filter on a Honda NC 750 X. First, place …
Nc 750 X In a few simple steps, we will see how to remove and replace the battery of the Honda NC 750 X motorcycle. First, place the motorcycle on a stand and…
Nc 750 X To set the clock on the Honda NC 750 X, turn on the instrument panel by inserting the ignition key into the corresponding lock. Once the panel is on,…

How to Replace the Starter Motor on a Derbi Senda 125?

To replace the starter motor on a Derbi Senda 125, you need to unscrew the bolts securing the cover located on the right side of the bike, under which the clutch is also found. Once the cover is removed, you will locate the starter motor at the top left relative to the clutch. By unscrewing the nuts that secure it in place, you can free it from its housing to insert a new replacement part. After the replacement, reattach the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos