Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Sh 125i
    4. : How to mount and remove the windshield on Honda SH 125 - 150 (2020)

Model: Honda Sh 125i
Part: Windshield
How to mount and remove the windshield on Honda SH 125 - 150 (2020)

Let's see in this video how to assemble and disassemble the windshield on a Honda SH 125 and SH 150 scooter, 2020 model, by following these simple steps. First we go to remove the plastic bulkhead of the instrument panel, leveraging something thin; we perform the same operation on the top cover of the headlight, as shown in the video. At this point we are going to install the windshield brackets, screwing the screws using two keys; now we can go and fix the plastic cap with the brackets again, thus fixing the windshield on them: apply the reverse procedure for disassembly!


Posted on 7 February 2024 by ScegliAuto



How to remove the windshield on Honda SH 125-150 2020
Sh 125i (1984-2020 / ) In today's video tutorial we will see instructions on how to disassemble the front windshield on a 2020 Honda SH 125-150 scooter, in simple steps. Fi
How to remove the windshield on Honda SH 125 (2021)
Sh 125i Let's find out the procedure that will allow us to remove and eventually replace the front windshield or visor on the Honda SH 125i of 2021, but also
To reset the oil light on the Honda Sh 125.
Sh 125i In this new guide dedicated to your 2020 Honda Sh 125, we will discover how to manually reset the oil indicator without the use of specific professio

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos