Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Honda SH 125?

Model: Honda Sh 125i
Part: Battery

Video tutorial

In order to replace the battery of the Honda SH 125, you will need to loosen the screws that hold the front panel of the motorcycle, just below the front headlight: the screws that hold it will be located inside the front wheel arch and inside the shield.

Once all the screws have been unscrewed, it will be possible to lever off the panel and locate the battery underneath: this must be removed from its seat by loosening the screws that hold it and disconnecting the power cables.

At this point, it will be possible to insert the new device to verify that everything is functioning properly.


Posted on 27 February 2025 by ScegliAuto


Related tutorials

How to Replace the Battery on a Honda SH 125
How to Replace the Battery on a Honda SH 125
Sh 125i This guide shows how to remove and replace the battery of the Honda SH 125 scooter, following the instructions below. First, place your scooter on th…
How to Set the Time on Honda SH 125 Scooter?
How to Set the Time on Honda SH 125 Scooter?
Sh 125i In this tutorial, learn how to set the time on the Honda SH 125 scooter, a very simple and quick operation, for example, after switching to daylight …
How to Replace the Battery on a Honda SH 125
How to Replace the Battery on a Honda SH 125
Sh 125i The battery of the Honda SH is located under the central footrest, so it must be removed by unscrewing the two screws near the front shield. The batt…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos