Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Honda SH 125

Model: Honda Sh 125i
Part: Battery

Video tutorial

The battery of the Honda SH is located under the central footrest, so it must be removed by unscrewing the two screws near the front shield. The battery is secured in place by a plastic bracket, screwed on both sides.

Before disconnecting the negative terminal, the YouTuber rightly cleans the entire area around the battery, then disconnects the negative terminal, followed by the positive terminal, and then we can extract it from its housing. Replace the battery by reversing the process, reconnecting the positive terminal first, then the negative, repositioning the safety bracket, and finally putting the footrest back in place, securing it with the two screws.

And that's it.


Posted on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Honda SH 125
How to Replace the Battery on a Honda SH 125
Sh 125i This guide shows how to remove and replace the battery of the Honda SH 125 scooter, following the instructions below. First, place your scooter on th…
How do you replace the battery of the Honda SH 125?
How do you replace the battery of the Honda SH 125?
Sh 125i In order to replace the battery of the Honda SH 125, you will need to loosen the screws that hold the front panel of the motorcycle, just below the f…
How to Set the Time on Honda SH 125 Scooter?
How to Set the Time on Honda SH 125 Scooter?
Sh 125i In this tutorial, learn how to set the time on the Honda SH 125 scooter, a very simple and quick operation, for example, after switching to daylight …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos