Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, we will see how to bleed and replace the radiator fluid or antifreeze on a Honda CRF 250L by following these simple steps. First, unscrew the filler cap of the antifreeze; then unscrew the screw on the water pump, which will allow us to bleed the coolant, as shown in the video. After draining it into a container, refill with new fluid, filling to the maximum level (indicated by a mark on the reservoir); start the engine and top up if necessary!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tyre on a Honda CRF 250L
How to Replace the Tyre on a Honda CRF 250L
Crf 250l In this video tutorial, you will learn how to remove the rear wheel and replace the tyre on the Honda CRF 250L enduro bike. First, remove the rear wh…
Replacement of the gear shift lever of the Honda CRF 250L.
Replacement of the gear shift lever of the Honda CRF 250L.
Crf 250l Today's step-by-step instructions will show us how to disassemble and replace the gear shift lever of the Honda CRF 250L motorcycle. First, we put th…
How to Replace the Engine Oil and Oil Filter on the Honda CRF 250L
How to Replace the Engine Oil and Oil Filter on the Honda CRF 250L
Crf 250l Today, replace the engine oil and oil filter on the Honda CRF 250L. First, place your bike on the centre stand and start by loosening the oil drain b…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos