Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Nc 750 X
Part:

In today's tutorial video, you will learn how to remove the original grips to replace them with 12-volt heated ones on a Honda NC 750X, following the instructions below. First, remove the lever guard by unscrewing the fixing screw; then remove the balance weight and insert something sharp between the grip and the handlebar to pry off the old grips, as shown in the video. At this point, insert the new heated grips, ensuring to clean the handlebar thoroughly first; apply the reverse procedure for reassembly!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Engine Oil and Oil Filter on the Honda NC 750X DCT
Changing Engine Oil and Oil Filter on the Honda NC 750X DCT
Nc 750 X In this guide, discover how to change the engine oil and oil filter as part of the regular maintenance service on the Honda NC 750X motorcycle. First…
How to Change the Brake Fluid on a Honda NC 750X
How to Change the Brake Fluid on a Honda NC 750X
Nc 750 X This guide explains the procedure for changing the brake fluid on a Honda NC 750X, following these simple steps. First, remove the cover of the brake…
How to Remove and Replace the Front Wheel of the Honda NC 750X
How to Remove and Replace the Front Wheel of the Honda NC 750X
Nc 750 X In this brief and simple guide, you will learn how to remove and replace the front wheel of the Honda NC 750X motorcycle. First, place your motorcycl…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos