Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake pads on the Honda Cbr 929

Model: Honda Cbr 929
Part: Brake pads

Video tutorial

Today, we will see how to remove and replace the front brake pads, which also applies to the rear ones, on the Honda Cbr 929 motorcycle. First, unscrew the fixing bolts of the front brake caliper using a socket spanner; then remove the caliper from the disc and lever the piston back in, as shown in the video.

At this point, remove the old pads and replace them with new ones of the correct type and high quality; clean any residual dirt and refit the new brake pads!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Honda CBR 929 RR?
How to Replace the Front Brake Pads on a Honda CBR 929 RR?
Cbr 929 To replace the front brake pads on a Honda CBR 929 RR, loosen the bolts securing the brake caliper to the corresponding disc: after the caliper has b…
How to Replace the Rear Brake Disc and Pads on a Honda CBR 929
How to Replace the Rear Brake Disc and Pads on a Honda CBR 929
Cbr 929 In this short and simple guide, you will find instructions to remove and replace the rear brake pads and disc on a Honda CBR 929 motorcycle. First, l…
How to Replace the Grips on the Honda CBR 929 RR
How to Replace the Grips on the Honda CBR 929 RR
Cbr 929 Watch this video to learn how to remove and replace the grips on the Honda CBR 929 RR Fireblade motorcycle, following the instructions below. First, …

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos