Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on the SH 125

Model: Honda Sh 125i
Part: Engine oil

This video is currently unavailable

Changing the oil is one of the most important maintenance tasks for your SH 125 after covering a certain number of miles. Follow these steps to do it quickly and safely.

First, completely switch off the scooter and position the stand correctly. Go to the lower area and locate the oil sump.

Place a container directly underneath and unscrew the plug using a suitable spanner. Allow all the used oil to drain out, then refit the plug.

Finally, refill the sump with new oil.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to change the transmission oil on the Honda SH 125 scooter
How to change the transmission oil on the Honda SH 125 scooter
Sh 125i In this tutorial, you can see how to change the engine oil on the Honda SH 125 scooter, a very simple and quick operation. First, wait for the engine…
How to Reset the Oil Change Light on a Honda SH 125
How to Reset the Oil Change Light on a Honda SH 125
Sh 125i The oil change service on the Honda SH 125 is performed for the first time after 625 miles and subsequently at 2,500, 3,750, 5,000, and 7,500 miles. …
How to Change the Engine Oil of the Honda SH 125
How to Change the Engine Oil of the Honda SH 125
Sh 125i If you need to change the engine oil and the related filter on your Honda SH 125 but are unsure of the necessary steps, do not worry as you will find…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos