Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Sh 300i
Part: Brake pads

Follow this guide to remove and replace the rear brake pads of the Honda SH 300i scooter. First, place the scooter on its centre stand and start unscrewing the bolts securing the exhaust silencer using a 14 mm socket spanner; once removed, you can unscrew the bolts of the brake caliper with a 12 mm spanner, removing the old pads as shown in the video. At this point, press the caliper piston to retract it, and install the new original brake pads.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 300i In this guide, you will learn the steps to remove and replace the front and rear brake pads on the Honda SH 300i ABS scooter. First, place the scoote…
Sh 300i This guide outlines the steps to remove and replace the rear brake pads on the Honda SH 300i scooter, following the instructions below. First, place …
Sh 300i In this video, you will see how to remove and replace the front brake pads on a Honda SH 300i scooter in simple and quick steps. First, place your sc…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos