Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If you notice that the oil light stays on when you start your Honda SH 150, even after changing the fluid, you need to follow this manual reset procedure. First, insert the key and turn on the ignition. Then, press and hold both buttons for a few seconds and wait for the light to turn off completely. At this point, release the two buttons, and the reset is successfully completed. If there are any errors, you can repeat the steps by turning the ignition off and on again.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Honda SH 150?
How do you reset the Service light on the Honda SH 150?
Sh 150 In order to reset the Service light that appears on the instrument panel of the Honda SH 150, you need to insert the ignition key into the ignition s…
How to Reset the Service Light on a Honda SH 150 Scooter?
How to Reset the Service Light on a Honda SH 150 Scooter?
Sh 150 In this tutorial, you will learn how to reset the service light on a Honda SH 150 scooter, a very simple and quick operation to perform only after co…
How to reset the service on the Honda SH 150 scooter?
How to reset the service on the Honda SH 150 scooter?
Sh 150 Resetting the service on the Honda SH 150 scooter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos