Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

Model: Honda Sh Mode 125
Part: Service warning light

Video tutorial

In this tutorial, see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required maintenance work.

Start by inserting the key and turning on the instrument cluster, then press the two upper buttons located on either side of the LCD display. At this point, keep both buttons pressed for about 5 seconds, or for as long as necessary until the oil change warning light disappears completely.

Restart the instrument cluster and check that the operation was successful.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?
How to Reset the Oil Service on the Honda SH Mode 125 Scooter?
Sh Mode 125 .. In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before.. …
How to reset the service on the Honda SH Mode 125 scooter?
How to reset the service on the Honda SH Mode 125 scooter?
Sh Mode 125 In this tutorial, we can see how to reset the service on the Honda SH Mode 125 scooter, an extremely simple and quick operation to be performed only …
How to Reset the Service on the Honda SH Mode 125 Scooter?
How to Reset the Service on the Honda SH Mode 125 Scooter?
Sh Mode 125 In this tutorial, we will see how to reset the service on the Honda SH Mode 125 scooter, a very simple and quick operation to be carried out only aft…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos