Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Pcx 125
Part: Spark plugs

In this tutorial, you will see how to replace the spark plug on a Honda PCX 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted and that the engine is completely cold for safety. Start by positioning yourself on the left side of the scooter, then remove the small panel located at the end of the footrest. Next, locate the spark plug, disconnect the power connector, and unscrew it using a 16 mm socket. At this point, insert the replacement spark plug and tighten it with a torque wrench set to 16 Nm.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug in the Honda PCX 125 scooter?
How to replace the spark plug in the Honda PCX 125 scooter?
Pcx 125 In this tutorial we can see how to replace the spark plug in the Honda PCX 125 scooter, an extremely simple and quick operation. First of all, we wai…
How to Replace the Air Filter in a Honda PCX 125 Scooter?
How to Replace the Air Filter in a Honda PCX 125 Scooter?
Pcx 125 In this tutorial, you will learn how to replace the air filter in a Honda PCX 125 scooter, a very simple and quick operation. First, ensure that the …
How to Replace the Drive Belt on a Honda PCX 125
How to Replace the Drive Belt on a Honda PCX 125
Pcx 125 Today's guide will show you how to remove and replace the drive belt on the Honda PCX 125 scooter, following the instructions below. First, place you…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos