Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, replacing the headlight bulb on a Honda Shadow 750 is an extremely simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by positioning yourself in front of the motorcycle, then locate the two bolts at the bottom of the headlamp and, using a spanner, unscrew both. Next, separate the headlamp from the base, unscrew the fixing screws of the bulb holder, and remove it from the housing. At this point, simply replace the bulb and reassemble everything by following the reverse procedure.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Honda Shadow 750?
How to replace the headlight bulb on the Honda Shadow 750?
Shadow 750 In this tutorial, we can see how to replace the headlight bulb in the Honda Shadow 750, a very simple and quick operation. First of all, make sure th…
How to Replace the Headlight Bulb on a Honda Shadow 750
How to Replace the Headlight Bulb on a Honda Shadow 750
Shadow 750 To replace the headlight bulb on a Honda Shadow 750, loosen the two screws located on either side of the headlamp. This will allow the unit to be ful…
Honda Shadow 750 Clutch Replacement
Honda Shadow 750 Clutch Replacement
Shadow 750 In today's tutorial video, you will see the main steps to remove and replace the clutch on a Honda Shadow 750. First, remove the bolts from the right…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos