Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Sh 125i
Part: Spark plugs

In this tutorial, you will learn how to replace the spark plug on a Honda SH 125 scooter, a very simple and quick operation. First, ensure the engine is completely cold. Then, remove the lower left fairing by unfastening the relevant rivets. Next, take off both the rear panel and the interior of the glove compartment. Disconnect the spark plug lead and grasp the spark plug using a 16 mm socket. Once the old spark plug is removed, insert the replacement, tighten it without applying excessive force, and reassemble everything.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 125i This guide shows how to remove and replace the battery of the Honda SH 125 scooter, following the instructions below. First, place your scooter on th…
Sh 125i In this tutorial, you will learn how to change the engine oil in a Honda SH 125 scooter, a very simple and quick operation. First, wait until the eng…
Sh 125i As we can see in this tutorial, replacing the air filter on the Honda SH 125 scooter is an extremely simple and quick operation. First, wait for the …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos