Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the oil service on the Honda SH 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel, then press and hold both "Info" buttons located on the left side of the handlebars until the time starts to flash. Once done, scroll through the various options using the "Info B" button, reach the service interval, and reset it by holding down the "Info A" button.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Honda SH 125 Scooter?
How to Reset the Oil Service on the Honda SH 125 Scooter?
Sh 125i .. In this tutorial, see how to reset the oil service on the Honda SH 125 scooter. This operation is extremely simple and quick,.. …
How to Change the Engine Oil on a Honda SH 125 Scooter
How to Change the Engine Oil on a Honda SH 125 Scooter
Sh 125i Changing the engine oil on a Honda SH 125 scooter, as shown in this tutorial, is an extremely simple and quick task. First, wait until the engine is …
How to Change the Engine Oil in a Honda SH 125 Scooter
How to Change the Engine Oil in a Honda SH 125 Scooter
Sh 125i In this tutorial, you will learn how to change the engine oil in a Honda SH 125 scooter, a very simple and quick operation. First, wait until the eng…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos