Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 250r
Part: Clutch

To replace the clutch on a Honda CBR 250R, loosen the screws securing the cover on the right side of the bike, allowing the cover to be removed and providing access to the underlying components: the clutch discs can now be identified and removed from their housing by loosening the bolts that secure them. After removing the old clutch, insert the new replacement part into its housing; once the installation is complete, close everything up, ensuring that all is functioning correctly.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Honda CBR 250R
How to Replace the Battery of the Honda CBR 250R
Cbr 250r In today's tutorial video, you will learn how to remove and replace the battery of the Honda CBR 250R motorbike, following the instructions below. Fi…
How to Replace the Antifreeze in the Honda CBR 250R
How to Replace the Antifreeze in the Honda CBR 250R
Cbr 250r In today's video tutorial, learn how to drain and replace the coolant in the Honda CBR 250R motorcycle. First, place the bike on a stand and begin re…
How to Change the Engine Oil in a Honda CBR 250R?
How to Change the Engine Oil in a Honda CBR 250R?
Cbr 250r As shown in this tutorial, changing the engine oil in a Honda CBR 250R is an extremely simple and quick task. First, wait for the engine to cool down…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos