Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 300
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Honda SH 300 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then place a container underneath it, locate the drain plug and unscrew it using a 12mm socket wrench. Let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the plug. At this point, all that's left to do is to pour the necessary amount of oil through the top hole.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in a Honda SH 300 scooter?
How to change the engine oil in a Honda SH 300 scooter?
Sh 300 In this tutorial, you will see how to change the engine oil in a Honda SH 300 scooter, a very simple and quick operation. First, wait until the engin…
How to Replace the Transmission Oil on a Honda SH 300
How to Replace the Transmission Oil on a Honda SH 300
Sh 300 Here are the steps to replace the transmission oil on the Honda SH 300 scooter, following the instructions below. First, place the scooter on the cen…
How to Replace Oil and Filter on a Honda SH 300
How to Replace Oil and Filter on a Honda SH 300
Sh 300 How to replace the engine oil and filter on a Honda SH 300 scooter? Follow this guide to proceed with the replacement. Position the scooter on the or…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos