Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cbr 650r
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Honda CBR 650R, a very simple and quick operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a 12mm socket wrench. Wait for all the oil to drain out, unscrew the old filter, tighten both the new filter and the drain plug. At this point, all that's left is to pour the necessary amount of oil through the designated upper hole.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Cbr 650r .. In this tutorial we can see how to replace the engine oil in the Honda CBR 650R, an extremely simple and fast operation. First of.. …
Cbr 650r In order to replace the clutch of the Honda CBR 650R, you need to loosen the screws that fix the cover located on the right side of the motorcycle: o…
Cbr 650r In order to replace the front brake pads of the Honda CBR 650R, you need to loosen the screws that hold the brake caliper to the corresponding disc: …

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos