Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Gp 800
Part:

In order to replace the variator of the Gilera GP 800, you need to loosen the screws that fix the transmission case, located near the rear wheel on the left side of the motorcycle: once this panel has been removed, you can locate the variator and loosen the central nut that fixes the mounting pin. At this point, you can remove the variator from its seat and insert the new replacement part, repositioning the belt around it; by doing this, you can verify that everything works correctly.

Posted on 5 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the variator from a Gilera GP 800
How to remove the variator from a Gilera GP 800
Gp 800 Today we will look at the instructions that will allow us to remove and replace the variator of the Gilera GP 800 scooter in simple and quick steps. …
How to Replace the Variator on the Gilera GP 800?
How to Replace the Variator on the Gilera GP 800?
Gp 800 To replace the variator on the Gilera GP 800, loosen the screws securing the cover located on the left side of the motorcycle to gain access to the c…
How to Replace the Variator on the Gilera GP 800
How to Replace the Variator on the Gilera GP 800
Gp 800 To replace the variator on the Gilera GP 800, loosen the bolts securing the cover near the rear wheel on its left side. Once all the fastening bolts …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos