Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Light on the Honda Civic?

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on the Honda Civic, inflate the tyres until they reach the recommended pressure values. These values are listed on the sticker attached to the driver's door pillar.

Once inflated, turn on the ignition and navigate the menu using the buttons on the left side of the steering wheel. Select "Customize settings" and then "TPMS calibration". This will open a screen where you need to select "Initialize" and then "Yes" to confirm the reset.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Honda Civic (2012-2015 / MK 9) .. In this tutorial, see how to reset the tyre pressure light on the Honda Civic, a very simple and quick operation to perform.. …
Honda Civic (2016-2021 / MK 10) Today we will show you how to reset the tire pressure warning light on the Honda Civic. After checking that the tire pressure is correct and performi…
Honda Civic (2016-2021 / MK 10) To manually reset the tire warning light on your 2018 Honda Civic, simply follow the steps outlined in the following guide. First, you need to turn o…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos