Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure on a Honda Civic

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

In today's video, we will see how to reset the tyre pressure on a Honda Civic, a tenth-generation model produced from 2016 to 2021. Let's start the procedure by turning on the vehicle's ignition and then moving to the central navigation display. Here, click on the vehicle settings and then select the option related to tyre pressure monitoring.

Now, by clicking 'initialize', the calibration of the new tyre pressure will begin, and you will need to drive the vehicle for a while to register the new pressure. Alternatively, you can repeat the initialization of the pressure three consecutive times to immediately reset the tyre pressure as shown in the video.


Posted on 19 May 2026 by ScegliAuto


Related tutorials

Honda Civic (2016-2021 / MK 10) These short and simple instructions will show us how to reset the tire pressure warning on the Honda Civic; before performing the reset, it is necess…
Honda Civic (2016-2021 / MK 10) In today's video, we will go through the entire procedure necessary to reset the tyre pressure on a Honda Civic, tenth generation model produced from…
Honda Civic (2012-2015 / MK 9) Resetting the tyre pressure is necessary whenever you have inflated or replaced a flat or punctured tyre. The video presented here shows how this ope…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos