Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Sun Visor on a Honda Civic

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Fuse box

See other generations:
Video tutorial

Open the sun visor as if you are using it and with a small flat screwdriver, rotate the hook that secures the visor to the roof of the car (see video). Simply perform this straightforward step to remove the sun visor from the roof, and the system is the same for both front visors.

Similarly, to install the new sun visors, insert them properly into place and rotate the hook in the opposite direction to secure them firmly to the roof. Once done, give the visor a gentle tug and open and close it several times to check its stability.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Honda Civic (2001-2006 / MK 7) Before you can start, sit in the driver's seat of your Honda Civic. Start by unclipping and removing the covers of the sun visor support brackets. Th…
Honda Civic (2006-2012 / MK 8) To replace the sun visor on a Honda Civic, detach the pin located on the inner side of the visor by simply pulling it out. Next, remove the plastic c…
Honda Civic (2016-2021 / MK 10) Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos