Do it yourself
Frequently asked questions about cars and motorcycles

Front Headlamp Bulb Replacement

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Headlight bulb

See other generations:
Video tutorial

For replacing the front headlamp bulb, there is not much room to manoeuvre, and especially for the driver's side headlamp, it is necessary to remove the headlamp itself and then the bumper. From the passenger side, however, even though space is very tight, it is possible to disconnect the connector, remove the rubber cover, and unclip the bulb retaining spring to replace it. From the driver's side, however, removing the headlamp is necessary, which requires the removal of the bumper; in fact, it may also be possible to unclip and move the bumper away from its location only on the driver's side, rather than removing it completely.

In any case, to remove the bumper, just remove a few screws and some push clips.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) To replace the front headlamp bulb on a Honda Civic, open the bonnet to access the components inside the engine bay. For the left bulb, you will need…
Honda Civic (2006-2012 / MK 8) To replace the front headlamp bulb on a Honda Civic, detach the rivets securing the inner wheel arch cover corresponding to the bulb that needs repla…
Honda Civic (1995-2001 / MK 6) Open the bonnet and locate the rear of the headlamp. Gently remove the rubber cover, taking care with the wires, and pull out the bulb holder to acce…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos