Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Multimedia System of the Honda WR-V

Model: Honda Wr V GL, MK 1 - Years 2017-2024
Part: Car stereo

In this guide, find the necessary instructions to remove the factory multimedia system and install a new Android system on the Honda WR-V. First, get inside the vehicle and start by removing the plastic cover on the sides of the air vents, prying it off; then remove the multimedia system by disconnecting the electrical connectors on the back, as shown in the video. At this point, install the new Android multimedia system that is compatible with your vehicle; modify the wiring if necessary!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Factory Radio with an Android Unit in the Honda WR-V
How to Replace the Factory Radio with an Android Unit in the Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) In today's video, we will go through the steps to remove and replace the factory radio with an Android unit in the Honda WR-V. First, get inside the …
How to Disassemble the Center Unit of the Honda Wr-V
How to Disassemble the Center Unit of the Honda Wr-V
Honda Wr V (2017-2024 / GL, MK 1) In this video tutorial, you will see the main steps to disassemble and replace the center unit or dashboard of the Honda Wr-V. First, get inside the …
How to Replace the Key Fob Battery on a Honda WR-V
How to Replace the Key Fob Battery on a Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) In this tutorial, see how to replace the key fob battery on a Honda WR-V, a very simple and quick operation. For this, you will need a small flathead…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos