Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

In this brief video tutorial, learn how to reset the remaining oil life on a third-generation Honda CR-V, produced from 2007 to 2012. First, turn on the vehicle. Then, press the button on the right side of the speedometer until the remaining oil life percentage appears.

Next, press and hold the same button until the message starts to flash. Release the button and turn it to the right to select the oil life option.

Now, press it briefly again and finally hold it down one last time to perform the reset.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Honda CR-V?
How to Reset the Oil Service Light on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To reset the Oil Service light on the Honda CR-V, turn the key to the 'on' position without starting the engine. Once the dashboard lights up, press …
How to reset the Service light on the Honda CR-V?
How to reset the Service light on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To reset the Service light on the Honda CR-V, turn the ignition key to switch on the instrument panel. Once the panel is on, press the button located…
How to reset the service light on Honda CR-V
How to reset the service light on Honda CR-V
Honda CR-V (2017-2022 / MK 5) To reset the service light on the Honda CR-V, get in and turn on the instrument panel without starting the engine. Use the controls on the steering w…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos