|
Do it yourself
| |||
| ||||
How to Replace the Battery on a Honda Civic
Model: Honda Civic
MK 10
- Years:
2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
If you need to replace the battery on this model from the Japanese manufacturer, follow the instructions below and in the video. Access the cabin to unlock the bonnet release, and once the bonnet is open, locate the battery on the left side. Use a socket spanner to remove the nuts securing the upper plate, then disconnect the negative terminal first, followed by the positive terminal. Remove the battery from its compartment, position the new one, and reconnect the positive terminal first, then the negative terminal. Finally, reattach the screws for the upper plate.
Updated on 16 July 2026 by ScegliAuto
Related tutorials
Honda Civic
(2016-2021 /
MK 10)
Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…
Honda Civic
(2006-2012 /
MK 8)
Replacing the vehicle's battery only takes a few minutes; let's see how to carry out the disassembly process on the Honda Civic. First, open the car'…
Honda Civic
(2001-2006 /
MK 7)
This guide shows you how to remove and replace the battery on a seventh generation Honda Civic in simple and quick steps. First, open the bonnet of y…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |