Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2011 Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

If you are wondering about the correct procedure to manually reset the service light on your 2011 Honda CR-V, this guide is all you need. Simply read the following instructions carefully and then put them into practice.

First, insert the key and turn it to position one to start the instrument panel. Immediately after, locate the button below the speedometer and hold it down for about fifteen seconds.

As soon as the display starts to flash, release the button and turn it clockwise. Confirm the reset and hold it for another fifteen seconds until the reset is complete.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light in a 2014 Honda CR-V
How to Reset the Oil Light in a 2014 Honda CR-V
Honda CR-V (2012-2017 / MK 4) The oil light in the 2014 Honda CR-V has activated due to insufficient oil in the reservoir. In such cases, it is necessary to top up the oil. After …
How to Reset the Oil Light on the Honda CR-V
How to Reset the Oil Light on the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Resetting the engine oil light on the Honda CR-V is very easy and takes just a few seconds. It does not require any direct intervention in the engine…
How to reset the oil light on the 2015 Honda CR V
How to reset the oil light on the 2015 Honda CR V
Honda CR-V (2012-2017 / MK 4) To manually reset the engine oil light on the display of the instrument panel of your 2015 Honda CR V, simply follow the correct procedure. First, st…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos